Skip to content
  1. Blog
  2. API

Reduce eSignature Drop-Off: Practical Ways to Improve Completion Rates

TL;DR: To reduce eSignature drop-off, find the step where signers stop, then fix that step. Most stalls come from unfamiliar emails, slow starts, long forms, heavy identity checks or a missing follow-up. Our automatic reminders take care of the last one.

People rarely refuse to sign. More often they mean to finish, and something in the experience gets in the way. The email lands in spam, the form is awkward on a phone, or a security check slows them down.

You do not need to rebuild your process to fix this. This guide shows you how to find the step where signers stop and what to change at each one. It also covers which BoldSign features help along the way.

How can you diagnose eSignature drop-off using a funnel?

Treat your signing process as a funnel with five stages, and count how many requests reach each one. The stage with the biggest fall is the one to fix first.

Think of it like a shop door. Fewer people walk past than look in, and fewer still step inside or buy something.

  1. Sent: your system created the request.
  2. Delivered: the email reached the inbox, not spam or a bounce.
  3. Opened: the recipient opened the message.
  4. Started: the recipient selected the link and began signing.
  5. Completed: the recipient finished and submitted.

How do you reduce eSignature drop-off step by step?

Work through the stages in order and remove the small points of friction at each one. Each section below covers one stage.

1) How do you improve sent to delivered rates?

A low delivered rate points to email trust, not the signing step. Mail providers and recipients both need to recognise the sender.

Common causes include an unfamiliar sender domain, old or invalid addresses, and messages sorted into spam or promotions.

  • Use a sender name people know and keep the same “From” identity every time.
  • Remove old addresses from your lists to cut bounces.
  • Keep subject lines plain and predictable so they do not look like spam.

We let you add your logo and colours to signing emails with branding. You can also send requests from your own domain with a custom email domain, so people see a name they know.

2) How do you increase delivered to opened rates?

Delivered emails go unopened when the request does not look urgent, safe or relevant. The fix is a clear subject line and a first sentence that says what the reader must do.

Recipients hesitate when the sender looks unfamiliar or the subject line reads as automated. They also skip emails that bury the reason for the request.

  • Write a direct subject line, such as “Signature requested: [Document Name]”.
  • Say in the first sentence what the document is and what you need.
  • Put the signing button near the top of the email.

You can change the wording of our signing emails with email content customization.

3) How do you reduce friction from opened to started?

Many requests stall here. People open the email, then put it off because starting looks like work.

Common causes are a login or app switch before signing, a link that expires too soon, and a next step that feels unclear.

  • Cut the number of app or tab switches the signer makes.
  • Make the first step after the email open the document straight away.
  • Set a fair expiry date and show it clearly.

Embedded signing keeps the signer inside your own app or portal. You can set how long embedded links stay valid, from 1 to 180 days.

4) Started to completed: how do you cut friction inside the document?

Signers who start but do not finish usually meet a problem inside the form. Fewer fields and clearer labels fix most of it.

Watch for too many required fields, signature fields buried at the end, and labels that confuse people on small screens.

  • Remove any field you do not truly need.
  • Fill in what you already know, such as name, company and date.
  • Place signature and initial fields early where it makes sense.
  • Add clear hints, such as “Sign here” or “Date fills in on its own”.
  • Check spacing and tap targets on a phone before you send.

Templates keep the layout the same for documents you send often. Senders can set default field values before sending, so signers type less. Our audit trails record each step for later proof.

5) How much authentication is too much for eSignatures?

Use extra checks only where the document’s risk calls for them. Each added step is one more place a signer can stop.

Trouble starts with checks on low-risk documents, or with an access code or a one-time password (OTP) that arrives without explanation.

  • Save stronger checks for sensitive documents.
  • Tell the signer in one sentence why you ask for a code.
  • Choose how often signers must enter the code.

Our authentication frequency settings offer four choices for access codes and OTPs. By default, signers enter the code once, when they first open the link. You can also ask for it at every access, until they sign, or once per document.

Why do eSignature reminders help people finish signing?

Reminders help because many unsigned documents are forgotten, not refused. A short, timely nudge brings the request back to the top of the inbox.

Stalls happen when nobody follows up or manual reminders slip. An expiry date that arrives without warning ends the request too.

  • Send a first reminder a day or two after the request.
  • Space follow-ups a few days apart and stop after a handful.
  • Add a final “expires soon” note when you use expiry dates.

You can set automatic reminders when you create a document, with the gap in days and up to five reminders. Your app can also send a reminder through the API based on each signer’s stage.

What common mistakes quietly lower eSignature completion?

Small usability problems cause most stalls, not refusals. The table pairs each mistake with what the signer feels and the fix.

Mistake What signers feel How to prevent it
Too many fields The task feels longer than expected Ask only for what you need
Unclear invitation Doubt about who sent it Name the sender and the purpose
No reminders They forget Schedule polite follow-ups
Unclear field labels Confusion and pauses Use short, plain labels
Signing order you do not need One delay holds up everyone Set an order only when it matters

What should you verify before sending an eSignature request?

Check five settings before you send: the sender, the email, the start, the form and the follow-up. Each one decides whether a signer can start and finish without a hitch.

  • The sender name is familiar, the domain is your own and the list is clean.
  • The subject line is clear and the signing button sits near the top.
  • Signers reach the document quickly and the expiry date is fair and visible.
  • The form holds only needed fields, known data is filled in, and it works on a phone.
  • Automatic reminders are on, with the first one a day or two after sending.

Where do these fixes make the most difference?

The same fixes apply to most documents, but some cases show them clearly. Here are a few common ones.

  • Signing at checkout: embedded signing keeps the customer inside your purchase flow.
  • Offer letters: an early signature field shows candidates how short the task is.
  • Vendor onboarding: dropping repeated fields makes the form shorter.
  • Low-risk agreements: lighter checks avoid needless friction.
  • Routine renewals: automatic reminders replace manual chasing.

Which BoldSign plan do you need, and what does it cost?

Reminders, audit trails and branding are on every plan, including the free Essential plan, as listed on the BoldSign pricing page in November 2026. Prices are in USD and billed yearly.

The Essential plan is free with 2 templates and one brand. The Growth plan costs $5 per user a month, with 10 templates and two brands.

The Business plan costs $15 per user a month. It adds unlimited templates and brands, email content customization and a custom email domain. The Premium plan costs $99 a month for unlimited users and includes the same email options.

Embedded signing and live use of the BoldSign API need the Enterprise API plan, from $30 a month with 40 envelopes. Each extra envelope costs $0.75. You can build and test in a free API sandbox first.

How do you start reducing drop-off today?

Start with the stage where most of your signers stop, fix it, and measure again. Then move to the next stage.

Frequently asked questions

What is a good eSignature completion rate?

There is no single figure that fits every document. Short, simple agreements tend to finish sooner than long forms. Tracking where signers stop tells you more than one overall percentage.

Why do people abandon documents after starting?

Signers usually stop when the form feels longer or harder than they expected. Too many required fields, unclear labels and repeated identity checks are common reasons.

Do eSignature reminders help people finish signing?

Yes, for signers who meant to sign and lost track of the request. We send automatic reminders at the interval you choose, up to five times, until the document is signed.

How many reminders should I send for one document?

Start with a first reminder a day or two after sending, then a few more spaced several days apart. Our automatic reminders allow up to five per document.

Does every document need signer authentication?

No, only sensitive documents usually need it. Add an access code or a one-time password for sensitive documents, and tell the signer why in one sentence.

How long does an embedded signing link stay valid?

By default, an embedded link from the BoldSign API expires 180 days after you create it. You can set any expiry between 1 and 180 days when you create the link.

How can I prove a document was signed correctly?

The audit trail records each signer's actions with timestamps, plus details of any authentication. By default, we attach the audit trail PDF to the completion email.

Is a document signed after a reminder still legally binding?

Yes, when it meets the usual rules for electronic signatures in your country, such as the signer agreeing to sign electronically. A reminder only prompts the signer and changes nothing about the signature itself.

Ranjitha Vazhivittan

Ranjitha is a skilled software developer with 3 years of experience at BoldSign. Alongside her technical expertise, she has a passion for writing and enjoys sharing thoughtful insights on technology and development. Beyond work, she stays curious by exploring emerging tools and trends, constantly seeking opportunities to learn and grow.

More posts by Ranjitha Vazhivittan
Get started

Sign up for your free trial today!

Start free trial
  • 30-day free trial
  • No credit card required