Skip to content
  1. Blog
  2. General

How to Show Accident Damage in Insurance Claim Forms: A Step-by-Step Guide

TL;DR: Show accident damage in an insurance claim form with clear photos and a mark on each damaged spot in the form. A Drawing field lets the claimant circle and point at damage while filling in the form, and the marks stay in the signed copy. Our page on eSignatures for insurance covers the wider claim workflow.

A driver writes “dent on the rear door” in a claim form. The adjuster reads it and asks which door, which side and how big. The claim then waits while emails go back and forth.

A photo with a circle around the dent answers all three questions at once. This guide shows how to capture and mark accident damage so the person reading your claim sees what you saw.

Why does visual damage evidence matter in a claim?

Accidents are visual, but most claim forms ask for words. A clear photo with a simple mark shows the reviewer where to look and how much is damaged.

Words alone often leave out:

  • Where exactly the damage sits.
  • How large the damaged area is.
  • Whether there is more than one damaged spot.
  • How the damage relates to the parts around it.

Visual evidence matters most when a claim is reviewed remotely or passes between several people. Each reviewer looks at the same marks, so nobody has to guess.

What are damage annotations on a claim form?

Damage annotations are simple marks added to a photo, diagram or form page to point out the damage. Think of a sticky note on a fridge that says “milk is here”: the mark tells the reader where to look.

Common marks include:

  • A circle around a dent, crack or scratch.
  • An arrow pointing at the point of impact.
  • A box around a damaged section.
  • A short freehand note next to the damage.

Annotations add context to a photo or report. The original photo and any inspection report still go with the claim.

Why use a digital claim form instead of paper?

A digital claim form lets the claimant fill in, mark, sign and send the form in one sitting. On paper, the same job means printing, drawing by hand, scanning and sending it back.

A digital form can hold:

  • A drawing area for marking the damage.
  • Image requests for damage photos.
  • Required fields, so nothing is left blank.
  • An audit trail that records who opened and signed the form.

The same approach suits vehicle claims, property claims, workplace incident reports and claims for damaged equipment.

Who benefits from marking damage before submitting a claim?

Anyone who has to explain damage to someone who was not there benefits. The marks save the reviewer from guessing and save the claimant from follow-up calls.

People who use damage marking most:

  • First-time claimants who are unsure what to include.
  • Fleet and commercial asset managers.
  • Property managers and landlords.
  • HR teams handling workplace incident reports.

How do you photograph accident damage for a claim?

Take photos as soon as it is safe to do so, before anything is moved or repaired. Clear photos are the base that every mark and note builds on.

Take these shots:

  • One wide photo of the whole vehicle, item or room.
  • A close-up of each damaged spot.
  • A few photos from other angles.
  • The surroundings, such as the road, the wall or the weather.
  • Any labels that identify the vehicle or asset.

Skip blurry, dark or cropped photos. A reviewer should be able to see the damage without asking you to send more.

How do you show accident damage in a claim form with BoldSign?

The sender, such as an insurer or claims team, adds a Drawing field to the claim form. The claimant then marks the damage inside that field before signing.

Our help article on the Drawing field for visual annotations covers every option. The main steps follow.

How does the sender set up the claim form?

  1. Select Create New Document, fill in the details on the prepare document page, and select Next.
  2. In the Fields panel, find Drawing Field and drag it onto the area to annotate.
  3. Place it over a vehicle outline, a floor plan or a page of damage photos.
  4. Resize the field so it covers the whole area, with room to draw on a phone.
  5. Select Send to share the form with the claimant.

To collect photos in the same form, add an Image field as well. You choose which image formats are allowed, and each image can be up to 25 megabytes (MB). Our article on how to request images from signers has the details.

How does the claimant mark the damage?

  1. Open the form and select the Drawing field to open the drawing window.
  2. Pick a tool: pencil, circle, line, rectangle or arrow.
  3. Choose a pen color and set the stroke width from 1 to 20.
  4. Mark each damaged spot, then select Save.
  5. Fill in the other fields and finish signing.

Undo and Redo fix a single stroke. Clear All removes every mark at once, and you cannot undo it. The field works with a mouse or a touch screen.

Where do damage annotations help most?

Annotations help most when a reviewer cannot see the damage in person. Here is how they fit four common claim types.

  • On a car outline, circle dents, cracked lights or a broken windshield.
  • On a floor plan, mark water stains, wall cracks or a damaged roof.
  • On a site or warehouse map, show where a workplace incident caused damage.
  • On a photo of a machine, point at broken or worn parts.

For a deeper look at vehicle damage, read our guide on how to mark car dents in a vehicle inspection form. For homes and rentals, see how teams handle property inspection report markup before signing.

How does BoldSign keep accident damage details secure?

Claim forms hold personal details, photos and signatures, so the way they are stored matters. Our security policy says documents are stored with Advanced Encryption Standard (AES) 256-bit encryption.

The signing record protects the claim in three ways:

  • Final documents are digitally signed, so any later change can be detected.
  • An audit trail records each person’s name, email, internet protocol (IP) address, device and actions, with timestamps.
  • Saved marks become part of the signed document, so every copy shows the same damage.

Our article on data storage and security in BoldSign explains where your data lives. You can download signed documents at any time, and account roles and privileges limit who in your team sees them.

When should you not rely on drawings alone?

Use drawings to guide the reviewer, never as a replacement for evidence your insurer asks for. Some claims need proof that only a professional can give.

Add official documents as well in these cases:

  • The insurer requires an official inspection.
  • The damage needs professional measurements.
  • The claim needs a repair estimate.
  • An expert has to confirm the cause of the damage.

Label your marks as “observed damage” unless a professional has confirmed them. Our guide on supporting document uploads for claims verification shows how to collect those extra files.

What mistakes delay an insurance claim?

Most delays come from evidence the reviewer cannot read or trust. Check your claim for these problems before you send it.

Problems with photos and marks

  • Blurry, dark or low-quality photos.
  • Marks that miss the exact damaged spot.
  • Too many marks, or marks that cover the damage itself.
  • Close-ups with no wide shot to show where they belong.

Problems with the form itself

  • A written description that does not match the photos.
  • Required claim fields left blank.
  • Inspection reports or repair estimates left out.

Keep each mark simple and accurate, so the reviewer can read it at a glance.

Which BoldSign plan do you need, and what does it cost?

Our pricing page lists basic and advanced form fields, signer attachments and the audit trail on every plan, including the free Essential plan. Prices are in USD, billed yearly.

The Growth plan costs $5 per user a month. The Business plan costs $15 per user a month and adds roles and custom permissions for teams. The Premium plan costs $99 a month for unlimited users.

Every paid plan starts with a 30-day free trial, so you can test a claim form before you pay.

How do you start using claim forms with drawing fields?

Build one claim form, send it to yourself and mark a test photo. You will see exactly what your claimants see.

Frequently asked questions

How do I show damage on an insurance claim form?

Take clear photos first, then mark each damaged spot on a diagram or photo in the form. Add a short written note for each mark so the words and the drawing agree.

What photos should I take after an accident for a claim?

Take one wide shot of the whole item, a close-up of each damaged spot, and a few shots from other angles. Include the surroundings and any labels that identify the vehicle or asset.

Can I draw on a claim form when I sign it online?

Yes, when the sender adds a Drawing field to the form. You open the field, mark the area with a pencil, circle, line, box or arrow, then save and finish signing.

Do the marks stay on the form after it is signed?

Yes. The marks you save in a Drawing field become part of the signed document, so everyone who downloads the final copy sees the same marks.

Can a claimant attach photos to a BoldSign claim form?

Yes. The sender can add an Image field and choose which image formats are allowed. Each image can be up to 25 MB.

Is a claim form signed online legally binding?

Yes, when the signer agrees to sign electronically and a record of the signing is kept. Your insurer may still ask for extra documents, so check its claim rules.

Can drawings replace an official damage inspection?

Only when your insurer agrees. Drawings help the reviewer find the damage, but an insurer may still send an adjuster or ask for a repair estimate.

Who can see the damage details in a claim form?

The people you send the document to, plus users on your account who have access to it. On higher plans, roles and custom permissions control who in your team can open documents.

Rayronald Ochola Otieno

Rayronald Ochola Otieno is a content specialist at BoldSign, specializing in video content and help articles within the eSignature domain. As a blog author, he creates well-researched, insightful content that simplifies complex eSignature topics like digital signatures, compliance, and workflow automation for businesses and professionals. With expertise in creating educational videos and articles, Ray helps users understand and adopt secure, efficient signing solutions. Beyond writing and video creation, Ray enjoys exploring new technologies, reading about the latest industry trends, and continually refining his skills.

More posts by Rayronald Ochola Otieno
Get started

Sign up for your free trial today!

Start free trial
  • 30-day free trial
  • No credit card required